ENTER YOUR E-MAIL FOR FREE JOB ALERTS RIGHT INTO YOUR INBOX -
AFTER THIS, YOU WILL NOT MISS ANY GOVT/PVT VACANCY
Check Your Email To Activate the Confirmation Link

ADVERTISEMENT


TSPSC Syllabus 2017 All NEW Telangana State PSC Syllabus/Exam Pattern PDF

TSPSC Syllabus

Are you still preparing with old TSPSC Syllabus? If yes, then stop and check here All NEW Telangana State PSC Syllabus… Candidates who have applied to participate in Telangana State PSC Exam they must start preparing according to the New TSPSC Exam Pattern. Candidates can check the exam pattern and complete syllabus through this page. You can also download the TSPSC Syllabus 2017 in the form of PDF through online process.

Telangana State Public Service Commission has provided the syllabus for its upcoming recruitment examination. Applicants who are going to appear in this examination they can obtain their syllabus through this page. Syllabus helps the candidates in knowing about the topics that can be asked in the examination. So, participants must go through the syllabus and exam pattern which is available on this page by the unit of recruitmentresult.com.

TSPSC Syllabus

TSPSC Syllabus and exam pattern for AEE Posts in Various Engineering Services

The AEE Exam consists of two papers i.e.

  • Paper I- General Studies and General Abilities
  • Paper II- Civil Engineering (Degree Level)

Read Now: How To Stay Awake All Night To Study

Paper I- General Studies and General Abilities

  • Current affairs – Regional, National and International.
  • International Affairs.
  • General Science; India’s Achievements in Science and Technology.
  • Environmental issues; Disaster Management- Prevention and Mitigation Strategies.
  • Economic and Social Development of India and Telangana.
  • Physical, Social and Economic Geography of India.
  • Physical, Social and Economic Geography and Demography of Telangana.
  • Socio-economic, Political and Cultural History of Modern India with special emphasis on Indian National Movement.
  • Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.
  • Indian Constitution; Indian Political System; Governance and Public Policy.
  • Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and inclusive policies.
  • Society, Culture, Heritage, Literature of Telangana.
  • Policies of Telangana State.
  • Logical Reasoning; Analytical Ability and Data Interpretation.
  • Basic English. (10th class Standard)

Check Here: Tips to Make Study Interesting

Paper-II: Civil Engineering (Degree Level)

SubjectTopics
Building Materials And Construction
  • Bricks– Types of Bricks, Indian standard classification, properties;
  • Stones – Types of stones, classification, properties, dressing and polishing of stones; Methods of Quarrying;
  • Cement – Different grades and types of cement, properties and IS specifications;
  • Aggregates – coarse and fine aggregate, properties and IS specifications;
  • Cement Mortar – Proportions of cement mortar for various applications;
  • Concrete – Constituents of Concrete, Different grades of Concrete, mix proportioning using IS Code, Properties of fresh and hardened Concrete;
  • Admixtures– Types of Admixtures
Strength of Materials And Theory of Structures
  • Strength of Materials: Simple stresses and strains, elastic constants and relationship between them; Compound bars; Temperature stresses; Shear forces and bending moment diagrams for beams; Principal stresses and Mohr’s circle of stress, Theory of bending and bending stresses ; Shear stress distribution; Theory of torsion; Springs; Deflections of beams; Thin and thick cylinders;; Analysis of trusses, Betti-Maxwell theorem; Shear centre and unsymmetrical bending.
  • Theory of Structures: Direct and bending stresses; Columns and struts; Strain energy method; Moving loads and influence lines; Arches and suspension bridges; Static and kinematic indeterminacy; Moment distribution, Slope deflection, and Kani’s methods applied to continuous beams and portal frames; Column analogy and matrix methods of analysis.
RCC and Steel Structures
  • Concrete Structures: Materials, permissible stresses and IS Specifications; Working stress methods; Limit State Method – Stress Blocks parameters, design of Beams, Slabs, Columns and Footing; Design for Shear and Torsion; Design of Retaining Walls, Water tanks, and T-Beam Slab bridges; Yield line theory.
  • Steel Structures: Properties of steel sections, permissible stresses, IS Specifications; Riveted and welded joints and connections; Design of simple and compound Beams and Columns, Column bases, Roof trusses, Plate and Gantry Girders; Plate Girder Lattice Girder Railway bridges, and Bearings. Plastic analysis.
    Pre-Stressed Concrete: Basic concepts, material for pre-stressing, losses in Pre-stress, classification of pre-stressing system; Analysis of PSC Sections.
Fluid Mechanics and Hydraulics
  • Fluid Properties; Measurement of Pressure – Manometers;
  • Fluid Kinematics – Classification of Fluids, Stream function and Velocity potential, significance and use of Flownets,
  • Fluid dynamics – Continuity equation, Bernoulli’s equations and Impulse momentum equation;
  • Laminar and Turbulent flow through pipes – significance of Reynolds number,
  • Hagen – Poiseuille’s equation,
  • Darcy – Weisbach equation, Friction factor, Water hammer phenomenon;
  • Compressible flow – Bernoulli’s equation for Isothermal and Adiabatic conditions, Mach Number, Mach cone, stagnation properties; Steady uniform flow through open channels;
  • Gradually varied flows – significance of Froude number, classification and computation of Flow profiles, Hydraulic jump, Surges;
  • Boundary layer – Laminar and Turbulent Boundary layer, Boundary layer thickness, rough and smooth Boundaries, Boundary layer separation; Dimensional analysis and similarity laws;
  • Hydraulic Turbines – classification, Velocity triangles, principles and design of reaction and impulse turbines;
  • Centrifugal pumps – specific speed, work done and efficiency, characteristic curves.
Hydrology and Water Resources Engineering
  • Hydrological cycle;
  • Rainfall – types and measurement, network design; Infiltration – Ф- index;
  • Runoff – process, factors and determination of runoff, dependable yield
  • Floods – flood hydrograph, computation of flood peak using rational formula, unit hydrograph method and Gumbel’s extreme value methods;
  • Groundwater – types of aquifer and properties, Darcy’s law, specific yield, steady radial flow to wells in confined and unconfined aquifers;
  • Irrigation – types and advantages, soil water plant relationship, consumptive use, duty, delta, base period, crops and their water requirements; Single and multipurpose projects;
  • Dams – classification, forces and design of Gravity dam and Earth dam;
  • Spillways – types, energy dissipation, stilling basin, Appurtenances;
  • Canals – alignment, Kennedy’s and Lacey’s theories, lining of Canals;
  • Weirs – components, design of vertical drop and sloping glacis weir;
  • Seepage forces – Bligh’s Theory, Khosla’s theory;
  • Canal falls – types and design principles
  • Cross drainage works – classification and design principles of aqueducts;
  • Hydropower– classification and principle components of Hydroelectric power plants.
Environmental Engineering
  • Water Supply – objectives, rate of demand, population forecasts;
  • Analysis of Water – classification, design of coagulation, sedimentation, filtration, disinfection and softening processes;
  • Methods of layout of distribution pipes – Hardy cross method;
  • Waste water engineering – systems of sewerage, hydraulic formula and design of sewers, BOD, COD, self purification of natural streams, methods of sewage disposal;
  • Treatment of sewage – principles and design of grit chamber, sedimentation tanks, trickling filters, activated sludge process, sludge digestion tanks, septic tanks;
  • Municipal solid waste – characteristics, collection and transportation of solid wastes;
  • Air Pollution – types and sources of pollutants, air quality standards;
  • Noise pollution – Impacts and permissible limits, measurement and control of noise pollution.
Transportation Engineering
  • Highway Classification as per IRC; Highway alignment; Engineering Surveys; Geometric Design; Cross sectional elements of road; Gradient;
  • Grade compensation;Traffic Surveys – speed, Volumes, origin and destination; Highway capacity and level of service as per HCM 2000
  • Intersection – at grade and grade separated; Channelization; Rotary intersection;
  • signal design – webstar method, traffic signs, pavement marking; Parking studies, accidental studies, pavement types, Factors considered for pavement design, flexible and rigid pavements design concepts
  • Railway Engineering: Permanent way, rails, sleepers, ballast; Creep, coning of wheel, rail fixtures and fastenings, super elevation, cant deficiency, curves, turnout; Points and crossings.
  • Airport Engineering: Selection of site of Airport, runway orientation and design, wind rose diagram, basic run way length, correction to basic runway length.
Soil Mechanics and Foundation Engineering
  • Soil Mechanics: Physical properties of soils, Classification and identification, Permeability, Capillarity, Seepage, Compaction, Consolidation, Shear Strength, Earth pressure, Slope stability;
  • Foundation Engineering: Site investigations, stress distribution in soils, Bearing capacity, Settlement analysis, Types of Foundation, Pile foundations, Foundations on expansive soils; swelling and its preventions; Coffer dams, Caissons, Dewatering, Bracing for excavations, Newmark charts, machine foundations.
  • Engineering Geology: Mineralogy, Structural Geology, Groundwater Exploration methods; Engineering Geology applications for Tunnels, Dams and Reservoirs; Geological hazards and preventive measures.
Estimation, Costing and Construction Management
  • Abstract estimate:
  • Detailed estimate – centerline, long & short wall method, various items of Civil Engineering works as per Indian Standard,
  • General Specifications – Earth Work, Brick / Stone Masonry in Cement Mortar, RCC, Plastering in Cement Mortar, Floor finishes, white wash, colour wash; Standard schedule of rates, lead and lift, preparation of lead statement;
  • Computation of earth work – Mid-ordinate, Mean Sectional area, Trepezoidal method, Prismoidal Rule;
  • Approximate estimate – Plinth area and cubic rate estimate.
Surveying
  • Principle and classification of surveying, chain surveying; Compass surveying; Levelling and contouring; Theodolite surveying; curves;
  • Introduction and Fundamental concepts of electronic measuring instruments – EDM, Total station, GIS & GPS.

 You May Read This: Strategies To Improve Memory

Paper-II: Civil Engineering (Degree Level) Exam Pattern

ExaminationNo.of QuestionsDuration (Minutes)Maximum Marks
Part: A: Written Examination (Objective Type) Paper-I: General Studies and General Abilities150150150
Paper-II: Civil Engineering (Degree Level)150150300
Part: B: Interview50
Total500

Read Now: Interview Preparation Tips

TSPSC Syllabus for Assistant Engineers Post In Various Engineering Subordinate Services

This exam contains two papers which are mentioned below:

  • Paper-I: General Studies and General Abilities
  • Paper-II: Civil Engineering (Diploma Level) or Mechanical Engineering (Diploma Level)

Paper-I: General Studies and General Abilities

  • Current Affairs – Regional, National and International
  • International Relations and Events.
  • General Science; India’s achievements in Science and Technology
  • Environmental issues and Disaster Management
  • Economy of India and Telangana
  • Geography of India with a focus on Telangana
  • Indian Constitution and Polity with a focus on local self Government
  • Society, Culture, Heritage, Arts and Literature of Telangana
  • Policies of Telangana State
  • History of Modern India with a focus on Indian National Movement
  • History of Telangana with special emphasis on Movement for Telangana Statehood
  • Logical Reasoning, Analytical Ability and Data Interpretation
  • Basic English (8th Class Standard)

Read Here: How To Find Online Study Material

Paper-II: Civil Engineering (Diploma Level)

SubjectTopics
Surveying
  • Fundamental concepts; Classification of Surveys; Chain Surveying; Compass Surveying; Levelling and Contouring; Theodolite Surveying; Tacheometry; Curves;
  • Introduction and fundamental concepts of electronic measuring instruments – EDM, Total Station, GIS & GPS.
Construction Materials & Practice
  • Properties and uses of construction materials – Stones, Bricks, Tiles, Sand, Cement, Timber, Plastics, Glass, Asbestos, Paints, Distempers, Enamels and Varnishes; Preparation of Cement mortar for various works.Classification of Buildings as per NBC,
  • Site investigation for foundation as per NBC -Trial Pit and auger boring, classification of foundations, construction of spread footing and well foundation;
  • Stone and Brick masonry – types and principles of construction;
  • Doors and Windows – types, fittings and fastenings, types and functions of Lintels, Sunshades and Roofs,
  • Flooring – Construction and types of material; Types of Stairs; Scaffolding; Types of Plastering, Pointing, Painting and White / Colour Wash.
Engineering Mechanics and Strength of Materials
  • Forces – types of Forces, Parallelogram, Triangle and Polygon Law of Forces, Lami’s theorem; Centre of Gravity and Moment of Inertia; Simple stresses and strains,
  • Hooke’s law – stress strain diagram, working strength, elastic constants, Poisson’s ratio, Relationship between elastic constants, compound rods, temperature stresses, strain energy, proof resilience, impact loading; Shear force and bending moment diagrams for simply supported, over hanging and cantilever beams, relation between intensity of loading, shear force and bending moment; Theory of simple bending, modulus of section, moment of resistance, distribution of shear stress in rectangular, circular and I-Sections; Deflection in cantilever and simply supported beams subjected to simple loading;
  • Columns and struts – Euler’s and Rankine’s formulae, Slenderness ratio, simple built-up columns; Analysis of dams and retaining walls;
  • Simple plane and pin- jointed trusses, Stresses by method of joints and method of sections.
Hydraulics
  • Properties of fluids, fluid pressure and its measurement; Types of flows, energies in fluid motion
  • Bernoulli’s theorem and its applications – venture metre, pitot tube; Orifice and mouthpiece; Notches and weirs; Flow through pipes, hydraulic gradient line and total energy line,
  • laminar and turbulent flow in pipes – Reynolds number, measurement of velocity; open channels;
  • Water turbines – classification, centrifugal and reciprocating pumps; Layout of hydroelectric power plant.
Quantity Surveying
  • Abstract estimate, detailed estimate – centreline and long & short wall method, various items of Civil Engineering works as per Indian Standards;
  • General Specifications – earth work, brick / stone masonry in cement mortar, RCC, plastering in cement mortar, Floor finishes with ceramic tiles and marbles, white washing, colour washing; Standard schedule of rates, lead and lift, preparation of lead statement;
  • Computation of earth work – Midordinate, Mean Sectional area, Trepezoidal method, Prismoidal Rule;
  • Approximate estimate – Plinth area and cubic rate estimate.
Design of Structures (RCC and Steel)
  • RCC structure: Design philosophies – principles and concepts of working stress method and limit state method, loads and permissible stresses, IS specifications, analysis and design – rectangular beam, slab, T-beam, column, footing and stair case.
  • Steel Structures: Properties of steel sections, loads and permissible stresses, IS specifications, Analysis and design – welded joints, beam, column, column base, tension member; Design of roof truss.
Irrigation Engineering
  • Definitions, duty, delta, base period, rainfall and its measurement, factors affecting runoff, methods of computing maximum flood discharge; Classification of head works, component parts of a weir and barrage,
  • factors influencing selection of site – reservoirs and dams; Classification of canals, canal lining, cross drainage works; Soil erosion, water logging, soil water plant relationship; Necessity of irrigation – advantages and disadvantages, irrigation methods
Environmental Engineering
  • Basics of ecosystem, water supply scheme; Sources of water;
  • Conveyance of water – pipes, joints and laying; Testing of water, drinking water standards; Treatment of water; Distribution of water; Water supply connection to a building, Quantity of sewage, surface drains, design of sewers running half full, limiting velocities; Laying of sewers, sewer appurtenances; Collection of sewage samples,
  • characteristics of domestic and industrial sewage – BOD, COD; Sewage treatment, septic tank & soak pit,
  • sewage disposal – dilution and sewage farming; House drainage arrangements in buildings;
  • Solid waste – collection and disposal;
  • Air Pollution – sources, effects and controlling methods.
Transportation Engineering
  • Alignment of roads – plain and hilly terrain, surveys; Cross section of road structure, width of pavement, Camber, Gradient, Super elevation, Transition curves, horizontal and vertical alignment; Pavement marking, traffic signs, traffic islands Types of soil,
  • classification of soil - Textural, IS Classification,
  • physical properties – plasticity, cohesion, consolidation, compaction, permeability, compressibility, soil moisture content, specific gravity, density; Bearing capacity of soil.

 Check Common Mistakes You Make in Tests

Paper-II: Mechanical Engineering (Diploma Level)

SubjectTopic
Thermal Engineering
  • Thermodynamics
  • Heat Engines
  • Automobile Engineering
Manufacturing Technology
  • Methods of manufacturing processes:
  • Metrology
Engineering Mechanics & Strength of Materials
  • Statics
  • Dynamics
  • Strength of Materials
Machine Design
  • Design factors
  • Factor of safety
  • Limits, tolerances and fits
  • Conventional symbols of Materials and machine components
  • Welding symbols
  • Surface roughness values and symbols
  • Specifications of materials and standard components
  • Bolts, Nuts and screws
  • Shafts, keys and couplings
  • Belt, chain and Gear drives
  • Cams
  • Fly wheel
  • Governors.
Engineering Materials
  • Mechanical properties of engineering materials
  • Testing and structure of materials
  • Production of iron and steel
  • Iron/carbon equilibrium diagram
  • Heat treatment of steels
  • Ferrous and non ferrous metals and their alloys.
Hydraulics and Hydraulics Machinery
  • Hydraulics
  • Hydraulics Machines
Industrial Engineering and Management
  • Management
  • Industrial Engineering

Read Also: Last Minute Exam Preparation Tips

Paper-II: Civil Engineering (Diploma Level) Exam Pattern

ExaminationNo.of QuestionsDuration (Minutes)Maximum Marks
Written Examination (Objective Type) Paper-I:General Studies and General Abilities150150150
Paper-II: Civil Engineering ((Diploma Level) OR Mechanical Engineering (Diploma Level)150150150
Total300

 You May Read This: How to Prepare for Written Exam

Applicants must prepare according to the above mentioned Telangana State Public Service Commission Exam Syllabus for cracking the exam with good marks. Candidates can manage their preparation timings according the exam pattern which provides the marks and time weightage for each exam separately. Candidates are advised to keep visited this page to get all latest updates of TSPSC Syllabus 2017.

Note:

For more details about Telangana State Public Service Commission Syllabus you may check this Official Link. Add this page as bookmarks to get up to date details about TSPSC Syllabus. Candidates if you have any query then you can freely ask to our experts by writing your query in the below given comment box, we will reply you with satisfied answer as soon as possible.

Something That You Should Put An Eye On

TSPSC Group 2 NotificationTSPSC Results
Telangana PSC RecruitmentTelangana PSC Admit Card
Telangana Govt JobsTips to Manage Stress
How to Solve a Problem in Exam CorrectlyGet Rid Of Sleeping While Studying
How Can You Write Fast In Exams?Tips To Absorb Info. What You Read

Filed in: PSC, Syllabus Tags: 

Are You Still Jobless, Get Salary Upto 8.5 Lakhs – Apply Now


ADVERTISEMENT


Leave a Reply

Submit Comment